Wireless wall outlets are electrical outlets that can be turned on or off by a wireless remote. Fabien is an experimenter who was looking for a way to control the power of his home devices from a remote location using HTTP. He thought of building his own from scratch, but quickly realized that the device would need to be certified for insurance purposes. Instead he bought a cheap commercially made certified wireless wall outlet and reverse engineered the protocol using an RTL-SDR.
To do that he used the existing OOK-Decoder software available on GitHub. From the analysis provided by OOK-Decoder, Fabien was able to successfully reimplement the transmission using an AVR microcontroller and 433 MHz transceiver circuit from Sparkfun.
After being successful with this, Fabien decided to take the project a step further and create the OOKLONE – a device that could automatically clone any 433.92 MHz OOK signal and replay it. The video below shows the OOKLONE in action.
The post Reverse Engineering Wireless Wall Outlets And Automatically Cloning OOK Signals appeared first on rtl-sdr.com.